| Audi |
| SKU |
Year |
AUDI Part Number |
| AU101 |
2000 - 2001 A4
2000 - 2001 S4 |
8D0 035 195 A |
| AU102 |
2000 - 2001 A6 |
4B0 035 195 A |
| AU103 |
2000 - 2001 A8
2000 - 2001 S8 |
4D0 035 195 A |
| AU104 |
2002 - 2004 A4 3.0 , 1.8T
2002 - 2004 S4
2002-04 A4 Cabriolet |
8E0 035 195 A |
| AU105 |
2002 - 2004 A6 3.0, 2.8, 2.7T
2002 - 2004 S6 |
4B0 035 195 J |
| AU106 |
2000 - 2004 A8 4.2
2002 - 2004 S8 |
4D0 035 195 J |
| AU107 |
1998-1999 A4
1998-1999 S4
1998-1999 A6
1998-1999 S6
1998-1999 A8
2000-2005 TT |
4B0 035 186 H |
| AU108 |
1997 - 2002 A4/S4
1997 - 2001 A6
2000 - 2003 TT |
4B0 035 186 AX |
|
Au101 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display.
- Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc.
- Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards.
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au102 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display.
- Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc.
- Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards.
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au103 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display.
- Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc.
- Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards.
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au104 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the AS and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the AS and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au105 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the AS and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the AS and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au106 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the AS and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the AS and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au107 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the SCAN and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the SCAN and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
Au108 The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
- Turn on radio. The radio display shows "SAFE".
- Press the FM2 and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
- Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
- Once the code shown on the display is correct, press the FM2 and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
- The radio should unlock and be usable shortly afterwards
- If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
- If you lose your radio code, contact your Audi dealer.
X - Close |
